General Information 
The award winning design of iNTELECT™ is the result of years of research and development into the most effective design for low voltage switchboards and motor control centres.
It is a multi purpose design intended for main and power distribution switchboards and motor control centres.
This version of iNTELECT™ is the product of our experience in manufacturing and testing as well as the input from our customers and end-users since iNTELECT™ was first produced in 1992.
Safety
The busbar system at the rear of the switchboard is fully shrouded and phase segregated to reduce the chance of phase-to-phase or phase-to-earth faults occurring. Functional units have been tested for arc fault containment up to 63kA. Automatic busbar shutters are available for demountable and withdrawable functional units.
Versatility
iNTELECT™ can be configured for fixed connection, demountable or withdrawable arrangements. This means that users can standardise on one switchboard system for all switchboard needs with one basic set of spares.
Busbars
The iNTELECT™ busbar system is a patented matrix (or grid) pattern in which the main busbars can occupy a number of predetermined vertical and horizontal positions. The horizontal busbars are arranged for maximum mechanical strength and cooling, with each phase fully insulated and segregated. The vertical (dropper) busbars are fully insulated and segregated from each other and are supported over the entire length.
The busbar system takes up almost no depth within the switchboard, yet offers maximum flexibility in switchboard design without departing from type test certification. Busbar connections can be readily accessible for maintenance and presents no obstacles to cables entering or exiting the switchboard from above or below. The current rating of the switchboard can be increased on site by simply adding busbars to the existing system. There is no need for dismantling busbars, modifying busbar supports, or re-routing of cables.
Consistent with the safety goals set for iNTELECT™, all mouldings are made from the highest grades of polycarbonate, and all plastics parts used in iNTELECT™ have been tested to prove fire retardance.